Mounting Engraving Plates With Standoff or Cap

 

 

20190616-174931-002-1-2.jpg

1) Mark the front of the plate where the
holes will be drilled with a marker or knife

20190616-180019-055-1-2.jpg

2) Drill the hole to desired diameter to fit standoff or cap 

engraving.jpg

3) Remove protective plastic cover and engrave plate

 

4) Mark holes in wall to align with plate 

20190616-181346-027-1-2.jpg

5) Drill hole in drywall for anchor
(Wood will not require anchor just attach with screw)

20190616-181422-004-1-2.jpg

6) Hammer lightly to install anchor flush (drywall)

 

7) Screw on the base of the cap or standoff carefully not to far

20190616-181809-026-1-2.jpg

8) Attach the plate to the base and screw down by hand 

20190616-181849-1-2.jpg

Complete